PE Series Polyester Ink

 

For exterior use. PE Series offers excellent adhesion and flexibility for metal applications. This high gloss formuladtion is also recommended for general OEM use, nameplates, automotive and equipment panels. Superior flexibility and chemical resistance. May be reduced for reverse roller coating, coil coating and spraying.

PE Series Colors

 

Standard Colors

Halftone Clear*  

PE-801
Topcoat PE-802
White* PE-803
Black* PE-804
Primrose Yellow PE-805
Lemon Yellow PE-806
Medium Yellow PE-807
Medium Yellow PE-808
Orange PE-809
Orange* PE-810
Fire Red PE-811
Fire Red* PE-812
Flag Red PE-813
Deep Red PE-814
Deep Red* PE-815
Magenta* PE-816
Light Blue* PE-817
Brilliant Perma Blue* PE-818
Navy Blue* PE-819
Ultra Blue* PE-820
Emerald Green* PE-821
Perma Green* PE-822
Iron Oxide Yellow* PE-823
Iron Oxide Red* PE-824
Iron Oxide Black* PE-825
 

Transparent Colors
Transparent Yellow* PE-831
Transparent Orange* PE-832
Transparent Red* (B) PE-833
Transparent Magenta* PE-834
Transparent Violet* PE-835
Transparent Blue* PE-836
Transparent Green* PE-837
Transparent Red* (Y) PE-838

 

Metallic Colors

Pale Gold* PE-826
Rich Pale Gold* PE-827
Silver PE-828
Bright Silver PE-829

 

Reducers/Modifiers

Flow Additive PE-845
Screening Thinner PE-847
Wash Up PE-849
Catalyst PE-850

 

Any PE Series color can be formulated as Heavy Metal Compliant as a custom order.

*Heavy Metal Compliant

*Heavy Metal compliant by CONEG legislation, ASTM F963-03, EN71-3 1994 and IS 8124-3: 1997

 

QT-PE REV B

 

Note: Information contained in Cudner & O'Connor's printed matter is based on laboratory and field tests. Because we cannot control actual production conditions, no warranty is expressed or implied. Careful testing is always recommended prior to production. Consult with  Cudner & O'Connor's Technical Service Department on all applications issues.

SUBSTRATES
 

Metal, anodized, mill finished and coated aluminum. In compliance with Title 21 CFR 175.300 (incidental food contact)

 

BAKE/CURE

 

Bake Dry: 300°F for 15 minutes, 350°F for 8 minutes, 400°F for 4 minutes, Flash-off 30 seconds at 500°F

 

PE Series Inks will not air dry. Equipment: Batch oven with convection air or industrial conveyor dryer (non-textile) are preferred. IR panels may provide sufficient cure if belt will accomodate time-temperature parameters above.

STENCILS
 

Cudnor Cote or other direct method emulsions, capillary films.

 

SCREEN MESH

260 to 355 mesh are generally recommended.

 

SQUEEGEE
 

All types, 60 to 80 durometer.

 

WASH UP

Use PE-849

 

MODIFIERS
 

Reducer: Use PE-847

Flow Additive: Use 0.25 to 1% PE-845

 

COVERAGE

Approximately 1200 to 1500 Sq. Ft./Gallon

   

CANDOC is a trademark of Cudner & O'Connor Company. All other products mentioned are registered trademarks or trademarks of their respective companies.

Questions or problems regarding this website should be directed to info@candocinks.com.
Copyright © 2001 Cudner & O'Connor Company. All rights reserved.
Last modified: Tuesday June 25, 2007 .