VC Flat Colors

Metallic Colors

Reducers/Modifiers

Clears

SGV Gloss Colors

Mixing Colors

Metallic Colors

Flexible pressure sensitive vinyls: Cast and calendered outdoor films such as Scotchcal, Avery, Meyercord, General Formulations.

Rigid sheet vinyl and foamed vinyl graphics panels: Sintra, Trovicel, Celtec, Vekaplan. VC Flat vinyl is recommended for highly plastisized or recycled soft vinyls as it resists rewetting.  Also recommended for Lexan, Makrofol and other polycarbonates, some acrylics, and other substrates with vinyl coatings.

VC & SGV inks dry through solvent evaporation. Fresh Air volume is more of a factor in dry time then temperature.

Force Dry: for high volume air dryer (3000-5000 cfm, equipped with air knives) at 100-120F: 30-60 seconds.

Air Dry: 15-45 minutes depending on air circulation and temperature.

CudnerCote or other direct method emulsions, capillary films.

160-300+ monofilament.

All types, 60 to 80 durometer.

REDUCER: Use SGV-701 or VC-101 to achieve desired viscosity. Mixing Colors should be used without thinning. 

RETARDER: Use SGV-720 or VC-120 to slow in screen drying. Excess use of Retarder will inhibit curing of the printed film.

FLOW-PROMOTER: To improve ink flow-out, use SGV-11335. 

Approximately 1200 Sq. Ft/Gallon.

V-SERIES Process Color Systems

High viscosity, low solids base and toner concentrates for 4-color process printing on vinyls & other plastics.  Two-part system allows printers to formulate proper densities for mesh and halftone requirements.

Print-ready colors are also available as special custom orders. One Gallon minimum per color.

V-Series Process Colors

4-Color Process Base............V-155*

Process Yellow.....................V-150*

Process Red.........................V-151*

Process Green......................V-153*

Process Black......................V-154*

Screening Thinner................VC-101

Retarder..............................VC-120

Reducers/Modifiers/Clears

Screening Thinner.............SGV-701

Retarder..........................SGV-720

Flow Promoter..............SGV-11335

Extender..........................SGV-717

Clear...............................SGV-702

Clear for Gold...................SGV-721

Cleaning Thinner...............SGV-710

Note:  

Information contained in Cudner & O'Connor printed matter is based on laboratory and field tests. Because we cannot control actual production conditions, no warranty is expressed or implied. Careful testing is always recommended prior to production. Please consult our Technical Department on all application issues.