TWO PART FORMULATION FOR METAL, GLASS & CONTAINER DECORATION |
| Superior adhesion and hardness for printing metal, glass, treated polyethylene and other plastic surfaces. Offers excellent chemical resistance to acids, alkalis, oils, etc. Extremely hard finish with excellent opacity and flexibility. Ideal for glass jars, bottles and other containers requiring product resistance. |
|
Standard Colors
Transparent Colors
Metallic Colors
Modifiers & Catalyst
QT-ET Rev F
*Heavy Metal Free Formula. Most ET Series color can be formulated lead free as a custom order. *Heavy Metal compliant by CONEG legislation, ASTM F963-03, EN71-3 994 and IS 8124-3:1997 |
Metal surfaces requiring a hard, durable finish, such as printed circuit board markings, equipment panels, glass decorating, food containers and other plastics.
Air Dry: 4 -6 hours. Chemical resistance and hardness will be good after 72 hours, but full cure should not be expected for 7 days. Force Dry: 325F for 5-10 minutes. 250F for 10-20 minutes.
For best results, allow mixed components to sit for about 1/2 hour prior to use. This procedure allows full interaction of catalyst and resin.
CudnerCote or other direct method emulsions, capillary films.
110 to 305 monofilament.
All types, 60 to 80 durometer.
REDUCER: ET-6060 RETARDER ET-6021 WASH-UP: ET-6010
Approximately 800-1200 Sq. Ft/Gallon.
Approximately 8 hours after mixing.
Note: Information contained in Cudner & O'Connor printed matter is based on laboratory and field tests. Because we cannot control actual production conditions, no warranty is expressed or implied. Careful testing is always recommended prior to production. Please consult our Technical Department on all application issues. |
|
CANDOC is a trademark of Cudner & O'Connor Company. All other products mentioned are registered
trademarks or trademarks of their respective companies. |