For general purpose indoor or outdoor poster or POP applications, PI Series Flat Poster Inks remain unmatched for opacity and color integrity. May be air dried or jet dried. For short term and chain store jobs where cost is critical, PI Series is unmatched for extendability (up to 50%)., Now also available in gloss and satin. Also Economy Series (ECO).

Standard Flat Colors

Primrose Yellow 

PI-1
Lemon Yellow PI-2
Medium Yellow PI-3
Orange PI-4
Cerise

PI-5
Medium Green PI-6
Brown* PI-7
Deep Red PI-8
Mandarin Red

PI-9
Fire Red PI-10
Magenta* PI-11
Brilliant Blue* PI-12
Ultra Blue*

PI-13
Dark Blue* PI-14
Black* PI-15
White* PI-16
Perma Green

PI-18
Peacock Blue* PI-19
Gold Metallic* PI-21
Emerald Green PI-22
Silver Metallic* PI-24
Burnt Umber* PI-26
Ochre* PI-28
 

Purple*                                PI-50

 

DAYGLO® 

Fluorescent Colors

Blaze Orange PI-60
Aurora Pink PI-61
Rocket Red PI-62
Signal Green PI-63
Arc Yellow PI-64

Fire Orange                          PI-65

Neon Red PI-66
Corona Magenta PI-67
Horizon Blue PI-68
Saturn Yellow PI-69

 

DAYGLO is a registered Trademark of DAYGLO Color Corporation. 

 

*Heavy Metal Free

*Heavy Metal compliant by CONEG legislation, ASTM F963-03, EN71-3 994 and IS 8124-3:1997

Colors formulated using DAYGLO pigments.

Color names are Trademarks of DAYGLO Color Corp.

QT-PI Rev B

SUBSTRATES

Coated and uncoated paper stocks, cardboard, paperboard.

DRYING

PI inks dry through solvent evaporation. Fresh air volume is more of a factor in dry time than temperature.  Force Dry: for high volume air dryer (3000-5000CFM, equipped with air knifes) at 100-120F: about 1 minute. Air Dry: 15-45 minutes depending on air circulation and temperature. Thorough drying (driving all solvents out of the printed film) is critical. Inks may otherwise post heat when stock is stacked. 

STENCILS

CudnerCote or other direct method emulsions, capillary films.

SCREEN MESH

140 to 250 polyester monofilament or 8xx to 20xx multifilament.

SQUEEGES

All types, 60 to 80 durometer.

MODIFIERS

REDUCER: use PI-40 or mineral spirits to achieve desired viscosity.

RETARDER: use PI-41 or solvent 150 to slow in-screen drying.

EXTENDER: PI Series can be  "based down" up to 50% without losing color integrity. Use PI-25 Heavy Base or PI-32 Light Base. 

CLEARS: Clear Overprint PI-31A.

COVERAGE

Approximately 1200 Sq. Ft./Gallon.

 

 

 

Note: Information contained in Cudner & O'Connor printed matter is based on laboratory and field tests. Because we cannot control actual production conditions, no warranty is expressed or implied. Careful testing is always recommended prior to production. Consult our Technical Service Department on all application issues.

CANDOC is a trademark of Cudner & O'Connor Company. All other products mentioned are registered trademarks or trademarks of their respective companies.

Questions or problems regarding this website should be directed to info@candocinks.com.
Copyright © 2001 Cudner & O'Connor Company. All rights reserved.
Last modified: Tuesday June 25, 2007 .