FOR UNTREATED OR TOP COATED POLYESTER, OTHER PLASTICS & METALS
While formulated primarily for printing untreated Mylar and similar polyesters, PR Series colors are also compatible with treated polyester and some other plastics and metal. PR is flexible and recommended for die-cutting; can be embossed under heat and pressure. Extended outdoor performance.

Standard Colors

White*

PR-7003
Black* PR-7004
Medium Yellow PR-7006
Navy Blue* PR-7007
Primrose Yellow

PR-7009
Ultra Blue* PR-7008
Medium Green* PR-7012
Fire Red PR-7013
Orange

PR-7014
Light Brown PR-7015
Maroon* PR-7019
Flag Red PR-7022
Deep Red

PR-7023
Perma Green* PR-7025
Brilliant Perma Blue* PR-7028
Emerald Green PR-7090
Light Blue*

PR-7091
Lemon Yellow PR-7092
Dark Brown PR-7095
Clear* PR-7002

 

Transparent Colors

Transparent Blue (R)* PR-7029
Transparent Blue* PR-7030
Transparent Yellow (G)* PR-7031
Transparent Orange* PR-7032
Transparent Red* PR-7033
Transparent Violet* PR-7034
Transparent Yellow (R)* PR-7035
Transparent Orange* PR-7036
Transparent Green* PR-7037

 

Reducers/Modifiers

Screening Thinner PR-7001
Cleaning Thinner PR-7010
Flow Promoter PR-7020
Retarder PR-7021
Catalyst PR-7050
Adhesion Promoter CM-P-33

 

*Heavy Metal Free

 

Any PR Series colors can be formulated heavy metal Free as a custom order.

*Heavy Metal compliant by CONEG legislation, ASTM F963-03, EN71-3 994 and IS 8124-3:1997

 

Note: Information contained in Cudner & O'Connor printed matter is based on laboratory and field tests. Because we cannot control actual production conditions, no warranty is expressed or implied. Careful testing is always recommended prior to production. Consult with our Technical Service Department on all application issues. 

QT-PR Rev C

PERFORMANCE NOTES

PR is an aggressive formula developed specially for untreated polyester. This is a fast drying ink which dries to a durable high gloss finish with superior weatherability. Flexible, resist chipping when die-cut.

BEST SUBSTRATES

Recommended primarily for untreated polyester. Also performs on top coated polyesters and other plastics, some synthetic woven fabrics, coated and uncoated metals (test sample with each coating).

OPACITY

Good on most colors.

DRYING

Dries through solvent evaporation; may be baked to accelerate cure.

Air Dry: 10 to 15  minutes depending on air circulation and temperature. 

Force Dry: For high volume air dry (3,000 -5,000) CFM equipped with air knives at 100 -120F: 30 - 60 seconds.

Bake Dry: 30 seconds at 300F.

STENCILS

Photographic, hand-cut water soluble or direct method.

SCREEN MESH

160 TO 300+ polyester monofilament.

SQUEEGEES

All types, 60 to 80 durometer.

MODIFIERS

REDUCE with PR-7001

RETARD with PR-7021

IMPROVE FLOW with PR-7020

WASH-UP with PR-7010

COVERAGE

1200 Sq. Ft/Gallon

CANDOC is a trademark of Cudner & O'Connor Company. All other products mentioned are registered trademarks or trademarks of their respective companies.

Questions or problems regarding this website should be directed to info@candocinks.com.
Copyright © 2001 Cudner & O'Connor Company. All rights reserved.
Last modified: Tuesday June 25, 2007 .