PURE Series High Solids Polyurethane Ink

A high solids, low VOC, thermal set polyurethane coating designed for screen printing and roller coating applications on decorative metal and glass. Dominant features are exceptional flow characteristics and cross-linking properties, chemical resistance, and out door durabillity. Exhibits exceptional flexibility on metals with or without the incorporation of a first-down size-coats. PURE 500 Series may be modified for coil coating and spray applications.

Performance standards meet and exceed the specific demands of the automobile and applicance metal trim fabricators.

Additional applications of the PURE 500 Series include nameplate fabrication, out-door metal signage, and decorative, architectural, and home furnishing glass.

 

Pure Series

Opaque White*  

PURE-501
Jet Black* PURE-501
Primrose Yellow PURE-503
Lemon Yellow PURE-504
Medium Yellow  

PURE-505
Orange PURE-506
Fire Red PURE-507
Deep Red PURE-508
Maroon  

PURE-509
Light Blue* PURE-510
Perma Blue* PURE-511
Navy Blue* PURE-512
Emerald Green*  

PURE-513
Perma Green* PURE-514

 

Transparent Colors

Yellow (G)* PURE-520
Yellow (R)* PURE-521
Red (Y)* PURE-522
Red (B)* PURE-523
Orange* PURE-524
Blue* PURE-525
Green* PURE-526
Magenta* PURE-527
Violet* PURE-528

 

Metallic Colors

Metallic Silver* PURE-538
Metallic Gold* PURE-539

 

Clears

Overprint Clear* PURE-515

 

Modifiers

Reducer PURE-500
Retarder PURE-531
Flow Promoter PURE-532
Catalyst PURE-550

 

Screen Wash Up

Universal WAsh-Up W-110

Most PURE Series color can be formulated as Heavy Metal Compliant for a custom order.

*Heavy Metal Free

*Heavy Metal compliant by CONEG legislation, ASTM F963-03, EN71-3 994 and IS 8124-3:1997

QT-PURE Rev B

 

SUBSTRATES
 

Metals, glass, anodized, mill finished and primed aluminum. Special primers and top coats are available for increased flexibility and chemical resistance.

 

BAKE/CURE
 

300°F for 15 minutes, 350°F for 8 minutes, 400°F for 4 minutes.

Colors may partially cured at lower temperature or cure time cycles during multi-color applications with a final cure at the appropriate time/temperature cycles.  

 

Note:

1) Insufficient temperature and thermal dwell time will adversly affect gloss levels and environmental resistance.

2) The addition of 0.5 to 1.0% of PURE-650 Catalyst is required.

 

 

 

Note: Information contained in Cudner & O'Connor printed matter is based on laboratory and field tests. Because we cannot control actual production conditions, no warranty is expressed or implied. Careful testing is always recommended prior to production. Consult our Technical Service Department on all application issues.

 

CANDOC is a trademark of Cudner & O'Connor Company. All other products mentioned are registered trademarks or trademarks of their respective companies.

Questions or problems regarding this website should be directed to info@candocinks.com.
Copyright © 2001 Cudner & O'Connor Company. All rights reserved.
Last modified: Tuesday June 25, 2007 .