Screenable Adhesives

Cudner & O'Connor

 

CM-5061A

CM-8950

 

Note: Information contained in Cudner & O'Connor printed matter is based on laboratory and field test. Because we cannot control actual production conditions, no warranty is expressed or implied. Careful testing is always recommended prior to production. Consult with Cudner & O'Connor's Technical Service Department on all application issues.

QT-SA Rev B

 

CM-5061A Pressure Sensitive Adhesive For Lamination of Non-Porous Substrates

 

Product Data: 

Amber color, excellent screening characteristics. Superior peel and shear strength, highly resistant to creep under load.

Substrates:

Paper, cloth, foam, plastics, and metals

Screening:  

Use 80 to 300 mesh, Tack of final film is directly related to thickness of deposit.

Reudcer:  

thin with Mineral Spririts if necessary

Drying:  

Jet Dry: Under 1 minute
Air Dry: about 1 hour.

------------------------------------------------------------------------

8950 Water Soluble Adhesive

Re-Moistenable - For Porous Substrates

For paper and cardboard , reactivate after printing by moistening with water.

SUBSTRATES:

Paper, cardboard. some coated stocks.

SCREENING:

Use 80 to 280 mesh. Stencil must be water-resistant or water-proof.

REDUCE:

Requires no thinning, wash-up with water.

DRYING:

Force drying (jet) recommended. High Humidity and low temperatures retard drying.

 

CANDOC is a trademark of Cudner & O'Connor Company. All other products mentioned are registered trademarks or trademarks of their respective companies.

Questions or problems regarding this website should be directed to info@candocinks.com.
Copyright © 2001 Cudner & O'Connor Company. All rights reserved.
Last modified: Tuesday June 25, 2007 .