FOR PAPER, WATER SLIDE DECALS AND OTHER STOCK

A fast drying, high gloss graphics ink designed for paper stock and other flexible substrates. Resists cracking and  alligatoring; displays excellent die-cutting characteristics. Use for water-slide decals; also recommended for Tyvek and leather. Excellent for hand-painting inflatable balloons. Available in 4-color process systems.(CPI)

Standard Colors

Overprint Clear* SS-1100
White* SS-1101
Flat White* SS-1104
Black* SS-1102
Primrose Yellow SS-1106
Fire Red SS-1107
Fire Red* SS-1107LF
Magenta* SS-1108
Lemon Yellow SS-1109
Lemon Yellow* SS-1109LF
Medium Yellow SS-1110
Medium Yellow* SS-1110LF
Orange SS-1111
Orange* SS-1111LF
Flag Red SS-1112
Flag Red* SS-1112LF

Ultra Blue*                      SS-1113

Brilliant Perma Blue* SS-1114
Perma Green* SS-1115
Medium Green SS-1118
Medium Green* SS-1118LF
Dark Brown* SS-1121
Deep Red* SS-1124
Navy Blue* SS-1127
Light Brown* SS-1129
Flat Black* SS-1130
Emerald Green SS-1190
Light Blue* SS-1191
Maroon* SS-1196

 

Mixing Colors

Process Yellow SSMS-01
Process Yellow* SSMS-01LF
Mixing Orange* SS-MS02
Rubine* SS-MS03
Rhodamine* SS-MS04
Purple* SS-MS05

Reflex Blue *                 SS-MS06

Cyan* SS-MS07
Green* SS-MS08
Mixing White* SS-MS09
Mixing Black* SS-MS10
Mixing Clear* SS-MS11

 

Metallics

Brite Silver* SS-1133
Pale Gold* SS-1134
Rich Pale Gold* SS-1135
Rich Gold* SS-1136
Silver* SS-1137

 

*Heavy Metal Free. Most SS-Series shades are available lead free as custom orders.

*Heavy Metal compliant by CONEG legislation, ASTM F963-03, EN71-3 994 and IS 8124-3:1997

QT SS Rev B

SUBSTRATES

Coated paper stock: where gloss, flexibility and die-cuttability are desirable. CPI Halftone Base and Toners are recommended for 4-color process work on posters and POS. Works well on foam board materials with clay coated paper liners.

Water Slide Decals: SS is the ink of choice for this resurging medium. Other recommended substrates: banner materials such as Tyvek, leather, wood and metals. Also used for hand-painting inflatables. 

DRYING

SS Lacquers dry through solvent evaporation. Fresh air volume is more of a factor in dry time then temperature.  Force Dry: for high volume air dryer (3000-5000CFM, equipped with air knifes) at 100-120F: 30-60 seconds. Air Dry: 15-45 minutes depending on air circulation and temperature. 

STENCILS

CudnerCote or other direct method emulsions, capillary films.

SCREEN MESH

160 to 300 Monofilament.

SQUEEGES

All types, 60 to 80 durometer.

MODIFIERS

REDUCER: use T-804 Lacquer Thinner or CM-9840 Fast Dry Thinner to achieve desired viscosity. Mixing colors should be used without thinning.

RETARDER: use T-22 to slow in-screen drying. Excess use of Retarder will inhibit curing of the printed film.

FLOW-PROMOTER: Opaque SS Lacquer colors do not normally require a flow additive. Mixing Colors and Clears may require small amounts of CM-9775 Concentrate. Use no more than 2 oz. per Gallon! Over use of this highly concentrated additive will create bubbling and adversely affect adhesion. 

COVERAGE

Approximately 1200 Sq. Ft./Gallon.

 

 

 

Note: Information contained in Cudner & O'Connor printed matter is based on laboratory and field tests. Because we cannot control actual production conditions, no warranty is expressed or implied. Careful testing is always recommended prior to production. Consult our Technical Service Department on all application issues.

CANDOC is a trademark of Cudner & O'Connor Company. All other products mentioned are registered trademarks or trademarks of their respective companies.

Questions or problems regarding this website should be directed to info@candocinks.com.
Copyright © 2001 Cudner & O'Connor Company. All rights reserved.
Last modified: Tuesday June 25, 2007 .